You are here

Abrasive fine water jet cutting 2D

Cutting of workpiece by abrasion from a high-pressure water jet mixed with abrasive agents.

Beskrivning
Illustration of Abrasive fine water jet cutting 2D

The process

Water under high pressure [1] of up to 4000 bar is focused through a nozzle [2]. Abrasive agents [3] are then supplied through the vacuum formed in the mixing chamber [4]. High pressure water jet charged with the abrasive agent then cut through the workpiece.

The cutting head is positioned by means of a gantry system.

Water mixed with debris is collected and filtered to partially reuse the abrasive agent.

Product examples
Demoartikel
Demoexempel
Demoartikel
Demoartikel
Demoartikel
Demoartikel
Demoartikel
Demoartikel
English translation unavailable for .
English translation unavailable for .
English translation unavailable for .
English translation unavailable for .
English translation unavailable for .
English translation unavailable for .
English translation unavailable for .
English translation unavailable for .
Advantages and disadvantages
In comparison with alternative methods
Fast positioning, Easy setup due to low cutting forces
No heat influence (No HAZ)
No post processing required
cuts all types of material
Cuts stacked materials
Cut both extremely thin and thick materials
cuts hard and brittle materials