You are here

Abrasive fine water jet cutting 3D of flat materials

3D Machining of flat material by abrasion from a high-pressure water jet mixed with abrasives.

Illustration of Abrasive fine water jet cutting 3D of flat materials

The process

Water under high pressure [1] of up to 4000 bar is focused through a nozzle [2]. Abrasive agents [3] are then supplied through the vacuum formed in the mixing chamber [4]. High pressure water jet charged with the abrasive agent then cut through the workpiece.

The cutting head is positioned usually by means of a portal system in combination with additional shafts to provide tilting and rotation. The systems are designed for 3D cutting of flat plates and to some extent also for cutting curved surfaces but does not have the same slant opportunities and working range as full 3D cutting.

Water mixed with debris is collected and filtered to partially able reuse the abrasive agent.

Product examples
English translation unavailable for .
English translation unavailable for .